Red and Green Treats for Santa Tray - Circular Decal

These magical Santa Tray Decals are a holiday best-seller for a reason! It is SO easy to make the cutest treat tray in little to no time. Just stick on the uv transfer and apply (no heat or tools required). 

Circular Santa Treat Tray Decals measure approximately 6-6.5" wide x tall

Need a different size? We may be able to print these to accommodate different size boards. Send us an email with the width and height in inches you are hoping for (info@shemakestransfers.com).

Please note: this listing is for the UV decal ONLY. It does not include the ornament/tray/cup.

DTF Transfer sizes:

• Adult 10.5-11" wide or tall, whichever number comes first
• Youth 7.5 - 8" wide or tall, whichever number comes first
• Toddler 6-6.5" wide or tall, whichever number comes first
• Pocket/Koozie Size 3.5-4" wide or tall, whichever number comes first
  
  UV DTF:
• Full Wraps 9-9.5" inches wide by 3.5-4.0" inches tall
• Decals are 2.85"-4" wide or tall, whichever number comes first
  

These are approximate sizes and sizing will vary based on design.

DTF Pressing Instructions

• Each order comes with pressing instructions
  
• It’s always a good idea to test your transfer first to find the ideal time + temp that works for your press as
  each heat press is made differently.
  
• We highly recommend using a commercial heat press.
  
• Apply HEAVY pressure. It should take two hands to pull your press shut.
  
• Peel your transfer swiftly, with confidence. Do not peel slowly if peeling hot. Think of it as ripping off a wax strip when you go to peel.
  
• Alternatively, you can wait for the transfer to cool and then peel.
  
  Material Temp Time
  100% Cotton 300°F 10secs
  50/50 Blends 300°F 10secs
  100% Polyester 275-300F 10secs
  
  SPECIFIC STEPS:
  Follow each step to ensure best results.

1. Pre press your material at time and temp above (300F for 5-10 seconds)

2. Apply the transfer face down, ensure heavy pressure, and press at 300F for 10 seconds

3. Swiftly peel the transfer off. Peeling it with confidence (not slowly) while it's hot OR wait for it to cool down and then peel

4. Give it a second press at 300F for 10 seconds but this time, place a piece of parchment paper/butcher paper or old t-shirt on top of your transfer and press. That's it! A stunning, matte and durable transfer is the end result.

Ideally, wait 24 hours before washing.

INSTRUCTIONS:

Gently peel back the carrier sheet (the bottom layer)

Apply the sticky decal to your surface

Use your fingers to rub over the transfer really well. You can also use a squeegee. 

Peel off the top layer

Do not wash for at least 24 hours to allow for a better cure

For apparel using DTF transfers:

• Wash inside out
• Wait 24 hours before washing
• Do NOT iron over design
• Hang to dry or tumble dry low
• Do NOT bleach
• Do NOT dry clean

For items (i.e. glass cups) using UV DTF:

Care Instructions:

• Hand wash only
• Use warm water and soft sponge or washcloth
• Avoid abrasive/harsh cleansers
• Do not soak

All transfer sizes are approximate.

Transfer colours may vary slighty.

Every heat press is different, we recommend doing a test first to see the best time and temp for your particular press.

Transfers are FINAL SALE.

For any issue with your order, please contact us at info@shemakestransfers.com. We're always happy to help!